When you buy a car wrap, you don't know how to judge quality of a car wrap. How to tell difference between good and bad car wrap is a problem that many car owners face. The following editor will share with you how to tell difference between good and bad car wrap. A few simple steps can determine quality of car wrap.
(1) Look at light transmission to determine if a car film is good or bad
Ordinary dyed solar film uses a conventional dyeing process, relying on color for thermal insulation, so color is very dark, and when viewed from inside car, there is always a foggy feeling; regardless of color depth of explosion. -Protective thermal insulation film, transparency should be good. Keep it well, even at night or rainy days, glass with explosion-proof thermal insulation film should provide good visibility to ensure driving safety.
（2）Look at color to determine if car wrap is good or not
Regular film and sunscreen film directly melt color into film. After tearing off top layer of plastic paper, scrape off adhesive surface strongly and color will disappear. This film will disappear after one or two years of use. , explosion-proof insulation Hot film is a high-tech product. It uses metal sputtering technology to coat nickel, silver, titanium and other high-quality metals on high-strength natural rubber film. Discoloration, fading phenomenon.
(3) Look at bubbles to determine if a car wrap is good or bad
Tear off plastic backing of car film, and then close it again. The low car film will bubble, but good car film will not be damaged after closing.
(4) Determine with your hands whether a car wrap is good or bad
Ordinary color film feels thin and brittle, and shaking glass leaves scratches on film; explosion-proof thermal insulation film appears thick and smooth, and surface of a good explosion-proof thermal insulation film becomes hardened. , so it will not be scratched after a long time using surface.
(5) Use test method to determine if a car film is good or bad
①Fade test.
Cut off a small piece of film, rub it on ground, or test it with a carburetor cleaner. A film that fades easily is a low quality film, and a film that cannot erase color is a high quality film.
②Insulation check.
The thermal insulation of car film is difficult to distinguish only with naked eye and hands. It can be judged by a simple test method: put a piece of glass with different car films on iodine-tungsten lamp (You can not touch tube of iodine-tungsten lamp so that lamp tube does not explode ).If you touch it with your hands, you will barely feel warm.
After reading editor's introduction on how to tell if a car movie is good or bad, do you have some understanding of how to watch a good car movie and how to tell a good car movie from a bad one? Is it very helpful after reading this knowledge? Finally, I hope getting to know editor can help everyone.