Oil level lamp. Illuminates to indicate that engine oil pressure is too low or fluid level is too low. To avoid excessive wear on engine, it should be stopped immediately for inspection.
Engine fault indicator light, this light indicates working status of engine, and it goes out after ignition is turned on, if it is always on after starting, it means that the engine is faulty and should be checked and repaired. repaired on time.
The water temperature warning light is on, please stop immediately and turn off engine. Wait until engine temperature drops before adding antifreeze. If antifreeze is not available, it can be temporarily replaced with clean water or mineral water.
Power Steering Warning Lamp, if illuminated, there is a problem with power steering system. At this time, power steering may be weakened or invalid, and steering resistance will increase, so it should be checked and repaired immediately.
ABS indicator, this indicator is used to show working status of ABS, it usually goes out after ignition is turned on, if it does not flash or go out after ignition, it means that ABS is defective and should be checked and repaired in time.
Tire pressure warning indicator, the indicator is on, stop in time to check if there is a tire puncture or lack of air. If you continue driving, there may be a risk of a tire puncture.
The battery indicator light, which indicates operating status of battery, will normally turn off when ignition is turned on. Always on after startup. Reminds that there is a problem with battery, which needs to be checked or replaced in time.
Brake fault indicator, indicator is on, check if handbrake is fully released, if handbrake is still released, check if brake fluid level is too low and brake pads are too thin.